Advance Static Routing Configuration
In this Cisco lab we will demonstrate the configuration of static routes using packet tracer in a slightly more complex network in order to get more learning and understanding of how static ...
ccna tutorials
How to Set Clock Rate on Router’s Serial Interface–(Cisco CCNA Lab using Cisco packet tracer)–Cisco Certification
This Cisco lab will help you configuring serial interface of a Cisco router. Prerequisites: If you are a student of cisco ccna and want to perform this lab then you will need cisco packet tracer ...
How to Enable and Administratively Shutdown a Cisco Router Interface–(Cisco CCNA Lab Using Cisco Packet Tracer)
In this Cisco CCNA lab you will learn the commands for enabling Cisco router interface and the command for administratively shutting down an interface of Cisco router. From the perspective of network ...
Checking And Assigning IP Address’s To Cisco Router Interfaces-(Fast Ethernet & Serial Interface)
In this Cisco CCNA lab you will learn about cisco router's ethernet interfaces and serial interfaces and router configuration commands for exploring and configuring these interfaces using cisco ...
Disable Different Line Interface Passwords on Cisco Devices–Routers/ Switches
This tutorial will benefit CCNA students and networking professional who want a quick go through of disabling passwords for different lines of Cisco devices(Switches/ Routers). This tutorial is ...
Connecting Network Computers through Cisco Switch — Cisco CCNA Lab using packet tracer
CCNA Portable Command Guide Cisco CCNA in 60 Days CCNA Official Cert Guide Library CCNA Certification All-in-One Connecting Computers through Cisco Switch: In this tutorial ...
How to configure Message of the Day Banner MOTD- Cisco CCNA Lab using Packet Tracer
In cisco devices such as routers and switches we can write a message which is displayed on every terminal connecting to this device. This message is known as Message of the day banner (MOTD). We ...
How to set and remove Auxiliary line password on Cisco Router (Packet Tracer)
Auxiliary port is mostly used for connecting to modem and it is located at the back of router. It can also be used for accessing the router’s configuration. If you want your router’s configuration to ...
How to Enable Password For line VTY Cisco (Telnet Password) on Cisco Router/Switch (Using Cisco Packet Tracer)
Cisco Line VTY (Virtual terminal line): VTY is short for Virtual Terminal lines and are used for accessing the router remotely through telnet by using these virtual router interfaces.The number of ...
How to Configure Cisco Enable Secret password (Cisco CCNA Labs using Cisco Packet Tracer)
What is Cisco enable secret password (Encrypted Privileged exec Password): Cisco Enable secret password is used for restricting access to enable mode and to the global configuration mode of a ...
Changing the host name of a router in Cisco Packet Tracer
I have planned to write Cisco labs which will help those preparing for CCNA exam and will be a quick guide for Cisco users. This is our first simple lab and will move on to the complex one's ...
Cisco Router Modes-(Cisco exe Mode, Cisco Enable Mode, Global Configuration Mode) and Cisco Commands list
Cisco router and Cisco switch have different modes for different operations depending upon the privileges of the users. Cisco router and switch basically have three modes namely user exe mode, ...